Metal Roof Installation
Standing seam and 5V metal with stainless or coated fasteners for beach homes.
Read the detailsJacksonville Beach, FL ยท service area
Jacksonville Beach takes the wind first and the salt every day. Roofs here fail at the edges and fasteners before anywhere else, and the city runs its own permit office, so a beach roof is a different job from one ten miles inland.

Roofing in Jacksonville Beach, FL means building for onshore wind and salt air: metal roofs, stainless or coated fasteners, and edge metal that resists corrosion. Permits here are issued by the City of Jacksonville Beach Building Division, not through Jacksonville's JaxEPICS system, and we register and file with the city before work starts.
Roofs in Jacksonville Beach
Metal roofing is especially popular at the beaches, and for good reason: standing seam and 5V panels shed wind-driven rain and outlast shingles in salt air when the fasteners and trim are right. Coastal storms here strip shingles by wind uplift and damage membranes on flat roofs, and shaded roofs on the west side of town grow algae that speeds up granule loss.
The housing is a mix: beach cottages and raised homes east of Third Street, newer two-story houses on narrow lots, condos and townhomes with low-slope roofs, and commercial buildings along Beach Boulevard and First Street. Flat roofs on those buildings get their seams, drains and parapet edges checked first; see flat roof repair.

Permits
Jacksonville Beach has its own Building Inspection Division, in the city's Planning and Development Department at 11 North Third Street, and contractors must keep an active registration with the city to pull permits. The city's roof permit application asks for the existing roof covering and slope, the new covering and underlayment with their Florida Product Approval numbers, and an in-progress affidavit that the deck nailing, dry-in and flashing follow the Florida Building Code. We fill all of that in before the tear-off.

Tell us what you are seeing. We will tell you what it likely is and when we can be there.
Weather
The beaches meet every storm before the rest of the county. In Irma in 2017, Mayport, just north of the beaches, logged gusts of 69 to 74 mph, and in Milton in 2024 it logged a 61 mph gust. Between storms the damage is quieter: salt spray corrodes plain steel nails and edge metal in a few seasons, so we use stainless or coated fasteners and aluminum or coated trim on every beach roof.
Most requested
Standing seam and 5V metal with stainless or coated fasteners for beach homes.
Read the detailsSeams, drains and parapet edges on condo and commercial flat roofs.
See how it worksLow-slope roofs on Beach Boulevard and First Street buildings.
Learn moreWind-uplift shingle loss and membrane damage after coastal storms.
Learn moreDeck re-nailing and a secondary water barrier during a beach reroof.
See how it worksSoft washing black algae off shaded shingle roofs.
Learn moreCoverage
We work across Jacksonville Beach from the ocean to the Intracoastal, and next door in Neptune Beach and Atlantic Beach, which have their own city governments too. South of Jacksonville Beach, Ponte Vedra Beach is in St. Johns County and permitted by the county.
Questions we hear
No. Jacksonville Beach issues its own roof permits through the city's Building Inspection Division, and we file there.
Stainless or coated fasteners and aluminum or coated trim, because plain steel corrodes quickly in salt air.
Yes. Seams, drains and parapet edges on low-slope condo and commercial roofs are regular work.
Yes, along with Jacksonville Beach and Ponte Vedra Beach.
Tell us the street and what the wind did. Calls are answered 24/7.

Reach us
Show Us Your Roofs service office, Jacksonville, FL