Jacksonville, FL ยท Gutters & Roof Edges
Gutter installation and repair for Jacksonville homes
Updated September 2026
Gutters decide where a Jacksonville downpour goes: into the downspouts and away from the house, or over the edge, behind the fascia and into the foundation. We install seamless gutters sized for Florida rain and fix the ones that sag, leak or overflow.
- Calls answered 24/7
- Seamless gutters formed on site
- Fascia checked before we hang
Gutter installation in Jacksonville, FL usually means aluminum seamless gutters formed on site to the length of each roof edge, hung on solid fascia with hidden hangers and pitched toward downspouts that discharge away from the foundation. Repairs cover sagging runs, leaking corners and end caps, re-pitching, and downspouts that dump water where it does damage.
Rain management
What gutters do on a Florida roof
A roof sheds rain in sheets, and in a summer thunderstorm those sheets arrive faster than most people expect. Gutters catch that water at the eave and carry it to a few controlled points. Without them, or with gutters that overflow, the water falls along the drip line, splashes back onto siding, soaks the fascia and collects against the foundation.
Most gutter problems come down to sizing and pitch. A gutter too small for the roof area above it, or one that holds water because it slopes the wrong way, overflows in exactly the storms it exists for. We size gutters and downspouts to the roof, not to whatever was there before.
Cost factors
What decides the cost of new gutters
Length and height
Gutters are priced by the foot, and two-story edges take more setup.
Gutter size
Six-inch gutters and larger downspouts cost more than five-inch.
Fascia condition
Rotted fascia is repaired before new gutters go up.
Downspouts and extensions
Each added downspout and extension adds material and labor.
The figures on this page are published Jacksonville ranges, not our quote. Gutters are priced after measuring every edge.
Gutter Installation & Repair
Seamless gutters, formed on site
Seamless gutters are formed from a coil of aluminum by a machine at the house and cut to the exact length of each roof edge, so the only joints are at the corners and outlets. Fewer joints means fewer places to leak. We hang them on the fascia with hidden hangers at close spacing, which holds the gutter's shape under the weight of water and debris, and seal the corners and end caps.
Six-inch gutters with larger downspouts suit many Jacksonville roofs better than the five-inch standard, especially on long runs and steep slopes.
Typical market range for aluminum seamless gutter installation, Jacksonville: $5.70 to $9.90 per linear foot (source). A planning figure, not a quote.
Gutter Installation & Repair
Gutter repair and re-pitching
Gutters that sag, pull away from the house or hold standing water can often be repaired rather than replaced. We rehang loose sections on new hangers, reset the pitch so water runs to the outlets, reseal leaking corners, end caps and seams, and replace damaged sections to match. Where the fascia behind has rotted, it is repaired first, because a gutter is only as solid as the board it hangs on.
See fascia and soffit repair for that part of the job.
Gutter Installation & Repair
Downspouts and drainage
Downspouts are where a gutter system usually fails without anyone noticing. Too few for the roof area, too small, or discharging right at the foundation, they send water where it does the most damage. We add or upsize downspouts, add extensions or splash blocks to carry water away from the house, and route them so an upper roof does not dump onto a lower one.
Water that pools against the foundation after every storm is a sign the downspouts need work.
Your options
Repair your gutters or replace them
| Repair | Replace with seamless gutters | |
|---|---|---|
| When it fits | A few loose hangers, leaking corners or one damaged section | Widespread leaks, rust, sagging or undersized gutters |
| Joints | Existing joints resealed | Joints only at corners and outlets |
| Sizing | Unchanged | Resized to the roof, often six-inch |
| Cost | Lower | Higher, but resets the whole system |
If the gutters are sound but keep clogging, [[gutter-guard-installation|gutter guards]] may be the better fix.
Step by step
How a gutter job runs
- 1
Walk the edges
Every roof edge measured and the fascia checked.
- 2
Size the system
Gutter size and downspout count matched to the roof area.
- 3
Repair the fascia
Soft boards replaced before anything is hung.
- 4
Form and hang
Seamless gutters formed on site and hung on hidden hangers.
- 5
Downspouts and outlets
Downspouts placed and extended away from the house.
- 6
Water test
Hose test to confirm pitch and outlets.
Roofing in Jacksonville
Gutters under Jacksonville's trees
Jacksonville's gutters work under a lot of trees. Researchers mapping the city's urban tree canopy put its average coverage at about 42 percent, and trees near a roof drop leaves, pollen and needles into the gutters through the year. Clogged gutters overflow in the very storms they are meant for, so the tree cover over a house is the first thing we look at when sizing gutters and deciding whether to add guards.
What to look for
Signs your gutters need work
Water pouring over the edge in rain
The gutter is clogged, undersized or pitched wrong.
Gutters sagging or pulling away
Hangers have failed or the fascia behind has rotted.
Drips at corners and seams
The sealant at the joints has failed.
Peeling paint or stains below the gutter
Water is running behind it.
Puddles or erosion at the foundation
Downspouts are discharging in the wrong place.
Questions we hear
Gutter questions
For most homes, yes. Fewer joints means fewer leaks, and each run is formed to fit its edge exactly.
Six-inch gutters with larger downspouts handle heavy Florida rain better, especially on long runs or steep roofs.
Yes, and it is a good time to, since the drip edge and fascia are already being worked on.
It depends on the trees around the house. Homes under oaks and pines may need it several times a year, or guards.
Usually. The fix is often re-pitching, more or larger downspouts, or a larger gutter on that run.
Related work
Other gutter and roof edge work
Gutter Guard Installation
Covers micro-mesh gutter guards, guards for oak and pine debris, guard cleaning and upkeep.
See how it worksFascia & Soffit Repair
Covers rotted fascia board replacement, vented soffit panel repair, animal entry point repair.
Read the detailsEmergency Roof Repair
Covers after-hours leak response, tree and limb impact repair, wind-torn shingle and panel repair.
Learn moreGet gutters that keep up with the rain
Call any hour. We install and repair gutters across Jacksonville and answer 24/7.
